Manufacturing method of pre-disassembly device for recycling and processing waste lead-acid batterie

The lead-acid battery is composed of positive and negative plates, separators, shells, electrolytes and terminal heads, etc. The chemical reaction of its discharge depends on the active materials of the positive plates (lead dioxide and lead) and the active materials of the negative plates (sponge Lead) is carried out under the action of the electrolyte (dilute sulfuric acid solution), in which the grid of the pole plate, the traditional battery is made of lead-antimony alloy, and the maintenance-free battery is made of lead-calcium alloy.

In the process of recycling waste lead-acid batteries, it is necessary to manually open the casing, take out the contents inside the casing, and manually transport the waste lead-acid batteries one by one. This method is cumbersome to operate and has low work efficiency.

In order to overcome the above-mentioned technical problems, the purpose of this equipment is to provide a pre-disassembly device for recycling and processing waste lead-acid batteries. The present invention adjusts the height of the movable plate by setting the locking bolts and the bolt holes, and then adjusts the movable plate and the fixed plate. The gap between them is convenient for conveying lead-acid batteries of different sizes; then the waste lead-acid batteries are placed on the storage box, and then the lead-acid batteries are placed on the conveying track by the manipulator for conveying, and the conveying track transports the lead-acid batteries to the inclined On the plate, start the second cylinder, push the l-shaped plate to rise, and then push the inclined plate to rise, and then slide the lead-acid battery out of the gap set between the fixed plate and the movable plate, and fall on the rubber table, through the second cylinder, l-shaped plate The setting of the plate and the inclined plate is convenient for conveying one by one and improving the work efficiency, and the rubber table is arranged in multiple directions, and the waste lead-acid battery will be buffered by the inclined surface during the falling process, so as to avoid damage to the waste lead-acid battery.