How much is a set of waste tire processing production line?

How much is a set of waste tire processing production line? This is a common question asked by customers by our customer service. Generally speaking, the price of waste tire crushing equipment will fluctuate due to factors such as the processing method, daily processing volume, and later discharge size (broken block refinery or granular). How much is a set of waste tire processing production line? Contact the waste tire processing equipment supplier for confirmation. The following is an analysis of the price of waste tire crushing equipment for several aspects.

waste tire processing production line

The waste tire processing production line is a complete set of large tire processing equipment that completely separates the three major raw materials contained in the tire at room temperature: rubber, steel wire, and fiber and realizes 100% recycling. The waste tire processing production line can recycle tires within the diameter range of 400-3000mm according to customer requirements, with strong applicability, the output size can be controlled within the range of 5-100mm, and the output can reach 200-10000kg/h. The production line runs at room temperature without any chemical additives and will not cause secondary pollution to the environment. The production line adopts PLC control system, which is easy to operate and maintain, with low energy consumption and long service life.

Waste tire treatment production line site

The SUNY GROUP waste tire disposal production line is basically assembled, and the workers are intensively debugging and optimizing. After the waste tires are crushed and sorted through the waste tire disposal production line, they directly enter the tire cracking and oil refining equipment to decompose the waste tires into steel wire, carbon black and fuel oil to solve the black pollution. This not only creates green economic benefits, but also promotes local Environmental protection construction process!

It is reported that the waste tire disposal production line project in Southeast Asia mainly crushes car tires and truck tires. The customer purchases SUNY GROUP's waste tire disposal production line, which is mainly used for the crushing pretreatment of tire cracking and refining and power generation. Before waste tires undergo thermal cracking treatment, they need to be crushed and steel wire separated to achieve the purpose of crushing, volume reduction and transportation cost reduction. The waste tires will be crushed and separated by the steel wire through the SUNY GROUP waste tire processing production line, and then turned into rubber blocks and sent to the cracking equipment.

It is reported that through thermal cracking of 1 ton of waste tires (rubber), about 0.35 tons of carbon black, 0.45 tons of waste rubber oil, 0.12 tons of steel wire and some combustible gases can be produced. Compared with waste accumulation, landfill, burning and incineration, thermal cracking technology is safer and more environmentally friendly, saves energy, has a good overall economy, and conforms to the development trend of the times.