Zhengzhou Zhengyang Machinery Equipment Co., Ltd

Scrap lithium battery processing and recycling production line

0000-00-00 00:00:00

Lithium batteries are mainly composed of a shell, a positive electrode, a negative electrode, an electrolyte and a separator. The positive electrode is constructed by coating lithium cobalt oxide powder on both sides of the aluminum foil current collector through PVDF which has a binding effect; the negative electrode structure is similar to the positive electrode, and is composed of carbon powder bonded on both sides of the copper foil current collector. At present, the research on the recycling of waste lithium batteries is mainly focused on the recovery of the valuable cathode precious metals cobalt and lithium. The copper in the anode of waste lithium batteries (with a content of about 35%) is a widely used important production raw material that adheres to The carbon powder on it can be used as additives for plastics and rubber. Therefore, the effective separation of the negative electrode constituent materials of the waste lithium battery has a driving effect on the realization of the limited recycling of the waste lithium battery and the elimination of its corresponding environmental impact.

Lithium Battery Recycling Machine

Lithium Battery Recycling Machine

The scrap lithium battery is sent to the primary shredder by the conveyor for shredding, and the shredded material is sent to the secondary multi-blade crusher through the conveyor for the second crushing, and the material after the secondary crushing enters the conveyor. The machine is equipped with magnetic separation equipment at the same time, which can separate the iron in the material. The sorted materials are sent to the air sorting machine through the conveyor. Separate the separator paper from the positive and negative electrodes by the induced draft fan and the cyclone feeder, and enter the separated positive and negative plates into a three-stage pulverizer for fine pulverization, and pulverize the material to about 20 mesh. The crushed materials enter the cyclone separator through the negative pressure system for dust filtration.

Through two airflow sorting, materials of different densities are stratified, and then positive and negative materials, copper, aluminum, nickel and other materials are obtained, and all the ultrafine dust is brought into the pulse dust collector by the negative pressure system for collection. The filtered tail gas will continue to be sent from the negative pressure system to the tail gas treatment equipment for air purification, so that it can reach the environmental protection emission standard before being discharged at high altitude.

Leave Message

Thank you for your interest in suny group. If you want to learn more about our products,Contact us now and get information and quotes for free!E-mail:sunymachine@gmail.com | Whatsapp:+8613674945231

Name: *
Email: *
Instant Messenger:
Raw Material:
Message: *