The crushing and sorting equipment for waste radiators can be used for copper and aluminum materials such as waste radiators, internal copper and aluminum of waste water tanks, and motor rotors. With the increasing number of electronic products, the demand for copper and aluminum is also increasing, and the recovery of copper and aluminum materials from waste copper and aluminum materials is relatively simpler than that of ores, and the content is higher, which has a very good Investment prospects, please contact us if you are interested.

Equipment for crushing and sorting waste radiators

Recycling and utilization of copper and aluminum composite materials such as automobile copper and aluminum water tanks, air-conditioning radiators, etc. In the past, the efficiency of dismantling equipment was low. With the increase in market demand and the increase in labor costs, copper and aluminum water tanks can be recycled and processed in large quantities The copper and aluminum water tank crushing and sorting machine equipment came into being. It is produced and processed by an automated production line. The small-scale crushing and separation production line can process 2 tons of scrap copper and aluminum water tanks in one hour. The production cost is greatly reduced, and it is increasingly favored by domestic and foreign customers. , Welcome to the field test site test machine.

Daily maintenance of copper and aluminum water tank crushing and separating machine:

1 In addition to frequently checking the tightening and loosening of various parts, we should also pay attention to check the wear of wearing parts. If the wear is serious, it should be replaced in time to avoid damage to the main components. And take necessary fire prevention measures.

2 In the production of large copper and aluminum water tank crushers, the material should be kept uniformly discharged to ensure the quality of crushing and normal production. At the same time, the overload of the motor is strictly prohibited to ensure the normal operation of the machine.

3 Before the start of the test run, strictly check whether the installation of each part of the large copper-aluminum water tank crusher meets the requirements, whether the screws and bolts are loose, you can use the hand to pull the belt for trial rotation, and whether there are any phenomena such as bumps. At the same time check the direction of rotation, it is strictly prohibited to crush flammable and explosive items to avoid accidents.

4 Due to the high speed, in addition to the correct and firm installation, at the same time, it should maintain good lubrication to maintain the normal operation of the machine. Under normal circumstances, the bearing temperature does not exceed 70 degrees is normal. The main engine bearing is added with butter and molybdenum disulfide once a week, and the high-speed butter has a good effect.